News Letter
 
 
Shopping Cart
0 items

Carba-Tec 635mm Wide Drum Sander - Twin Drum

Carba-Tec 635mm Wide Drum Sander - Twin Drum
Click to enlarge
Price: $2,999.00
Availability: In Stock
Model: WDS-630C
Manufacturer: Carbatec
Average Rating: Not Rated

Features 3hp / 240v single phase motor (must be hard-wired). The variable speed rubberised feed belt protects the underside of panels during infeed. Abrasives are spirally wound onto the both drums and are tensioned at both ends with spring clips - setup takes only a few minutes.

Drums can be configured with coarse paper on the front drum and fine paper on the rear to allow you to produce a finished board in one pass.

Adequate dust extraction (at least 2hp) is a prerequisite for using this machine.

Requires 15 amp outlet

 

main motor 3hp 240v
conveyor motor 1/6hp
max sanding width 620mm
max sanding thickness 135mm
min sanding thickness 6mm
drum diameter 127mm
drum speed 1440rpm
feed speed 1 to 6 mpm
dust port 2 x 4"
table size 630 x 780mm
workshop footprint 1130 x 780 x 1300mm
net weight 199kg
gross weight 210kg
Write Review
Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:

There are no additional images for this product.