The Vicmarc® VL 200 Sit Down lathe has been designed to suit people in wheelchairs or for people who have trouble standing for a long period of time.
The lathe comes complete with an electronic variable speed unit, a 1.5kW motor and a magnetic remote switch box that can be positioned anywhere where you are working.
The stand can also be purchased separately to suit a VL200 Short bed Lathe.
Stand Only - Part No. V01083
The stand is designed to be adjustable to suit many different applications and sizes. The adjustable legs allow up to 150mm height adjustment (every 25mm) and the pivoting bed allows a tilt angle from 0° to 45° (every 7.5°).
The height range from the floor to the centre of the spindle while the lathe is tilted at 45° is from 750mm to 900mm and when the lathe is tilted at 0° the height range is from 950mm to 1100mm.
Centre Height
Swing Over Bed
Distance Between Centres
Work Height (Stand Bottom to Spindle Centre) tilted at 45 / 0 deg
Indexing Holes
Headstock & Tailstock Spindle
Spindle Bearings
EVS 10-3000 rpm
Toolrest Post Diameter
Hole Through Headstock Spindle
Hole Through Tailstock Spindle
Quill Travel
Net Weight
Length x Width x Height (mm)
Standard Accessories
1
1
1
1
1
1
1
1
1
Faceplate 100mm or 125mm
Live Centre
Tool Rests 300mm
10mm Knockout Bar
14mm Knockout Bar
Drive Dog
Spanner
Vicmarc Hat
Owner’s Manual
Available In
Thread
M30 x 3.5
M33 x 3.5
M33 x 3.5
M33 x 3.5
1 1/4" x 8
Power Plug
Australia
Europe
United Kingdom
United States
United States
News Letter
Shopping Cart 
